You can't miss this 2-handle low-pressure sink mixer tap from SCHÜTTE! This brass sink tap has a long service life.
The wall-mounted faucet also has two acrylic handles and ceramic valve caps. It is a low-pressure mixer, suitable only for non-pressure devices/small accumulators (5 l boiler).
If you are looking for a low-pressure faucet for washbasins and sinks, this sink faucet is an excellent choice.
Color: Chrome
Material: Brass
Dimensions: 22.5 x 13.5 x 26 cm (L x W x H)
Wall-mounted mixer with swivel spout
Protrusion: approx. 23 cm
Type with 2 acrylic handles: Brillant
1 ½" (Ø approx. 1.9 cm) ceramic valve caps
Low pressure
Only suitable for non-pressure over-the-sink devices/small accumulators (5-litre boiler)
Safety notes. . Only allow experts to carry out installation work. . CAUTION WATER DAMAGE! Before installation, please turn off the general water supply. . Make sure that all gaskets have the correct fit. . These taps are not suitable for use on low-pressure and small electric storage heaters. . We recommend installing a filter in the appliance or at least using angle valves with a filter, to avoid the ingress of foreign matter, which could damage the cartridge. . This tap is intended for use in private households only! Only suitable for use in rooms with a temperature above 0 C, when there is a risk of frost, turn off the water supply and drain the tap. . Be careful when adjusting the hot water. Danger of scalding! . Incorrectly installed fittings can cause water damage! . Please ensure that no caustic or corrosive products, such as detergents or household cleaning products, come into contact with the connection hoses; This can lead to water damage. . Despite careful production, sharp edges may occur. Please be careful! The washbasin tap is delivered in sturdy packaging to protect it against transport damage. The packaging is made from recyclable materials. Dispose of it in an environmentally friendly way. Do not throw the product into normal household waste at the end of its service life, but ask your local authority about the possibility of environmentally friendly disposal. Technical data . Flow pressure: Recommended as 1.5 to 6 bar; In the case of a connection pressure higher than 6 bar, we recommend installing a pressure reducer. . Water temperature: max. 80 °C Installation instructions . Screw the connection pipes by hand, do not use pliers or a wrench!. . After installing the faucet, please unscrew the mixer nozzle, flush the pipe and faucet thoroughly for a longer period of time to remove contamination and residue. . Do not twist or strain the pipes! When using for the first time, check the connections for tightness! . Carefully check all connections after the first use to ensure they are tight. . We assume no warranty for incorrect installation - especially for subsequent damage!
