This LONDON thermostatic bathtub faucet from SCHÜTTE is of high quality and saves water, making it the perfect choice for your bathroom.
This bathroom faucet has a replaceable thermostat element and a child-safe temperature control at 38 °C. The unique Eco-Stop function helps reduce water consumption by up to 50%. Thanks to the chrome-plated surface, this bathtub faucet has a beautiful shine, and the solid brass construction gives this bathroom faucet great durability.
The bathtub faucet is easy to install and clean.
- Color: Chrome
- Material: Brass
- Finish: Chrome
- Dimensions: 26.8 x 7.2 x 5.5 cm (L x W x H)
- 120mm gauge distance for connection
- Replaceable thermostat element
- Temperature control device with child protection, at 38° C
- Eco-Stop function - up to 50% less water consumption
- ½" (approx. 1.9 cm diameter) ceramic valve heads and shower hose connection
Safety instructions - Please have the assembly carried out by qualified persons only. ATTENTION: WATER DAMAGE! Please turn off the general water supply before installation. Please ensure that all gaskets are correctly in place. - These taps are not suitable for use on small low-pressure and electric boilers. We recommend installing a filter in the installation to prevent particles from entering which could damage the upper parts of the valve. Water tap for use in private households! only suitable for use in rooms with a temperature above 0 C; In case of frost, disconnect the water supply and drain the fittings. ATTENTION when setting hot water: Danger of burns! - Improperly fitted taps can cause water damage! - Even with careful manufacturing, sharp edges may occur. We recommend that you be very careful. DisposalTo protect against transport damage, the water tap is delivered in solid packaging. The packaging is made of recyclable materials. Please dispose of it in an environmentally friendly way. At the end of its service life, do not dispose of the product in normal household waste, but enquire at your local authority about environmentally friendly disposal options. Technical data - Flow pressure: 1.5 bar recommended if a pressure regulator higher than 6 bar is installed. Water temperature: max. 80 °C Installation instructions - After installing the water tap, please unscrew the mixing nozzle, flush the pipe and the water tap thoroughly for a long time, so that dirt and residues (slivers and hemp residues) are washed away. - Check the connections for leaks after commissioning! - The warranty - especially for consequential damage - is excluded in case of incorrect installation! Maintenance instructions Sanitary taps require special maintenance. Therefore, please observe the following instructions: - Chrome-plated surfaces are sensitive to limescale solvents, acidic and abrasive cleaning agents of all kinds. - Colored surfaces should not be cleaned with abrasive, caustic or alcoholic agents under any circumstances. . Clean the taps only with clean water and a soft cloth or leather. Do not forget to unscrew the mixer nozzle at regular intervals and remove any limescale residues or foreign objects. It is recommended to replace the mixer nozzle with a new one if it is very dirty. Maintenance . Please note that the upper part of the valve is subject to wear and may need to be replaced every 1 or 2 years if the water is heavily limescale or contaminated. An illustrated instruction manual for changing the upper valve part can be found on our website at the following link: web.fjschuette.de/Austausch Kartusche-Ventiloberteil.pdf - Regularly check all connections and joints for leaks or visible damage - In the event of leaks or visible damage to the tap or connection hoses, they must be checked or replaced immediately by a specialist. Dismantling - Before dismantling the product, turn off the water supply. Be careful of running residual water. Carry out dismantling in the reverse order of the assembly instructions 1 The illustrations are for visual representation, deviations from the product are possible. Technical changes reserved. WARRANTY CARD Franz Joseph Schütte GmbH offers a manufacturer's warranty for the luminaire you have purchased in accordance with the warranty conditions on our website. Warranty rights from the purchase contact with the seller as well as statutory rights are not limited by this warranty. Warranty conditions: 1. Scope of warrantyFranz Joseph Schütte GmbH guarantees free from defects, the quality of materials and workmanship suitable for the intended use, professional assembly, tightness and function. The warranty only applies to the country in which the product was purchased. The warranty includes a limited 1-year warranty for the durability of non-glossy chrome surfaces, such as bronzed or colored surfaces. The following are excluded from the warranty: . Valve top - Damage caused by incorrect assembly, commissioning and handling - Damage caused by external influences such as fire, water, chemical effects. Mechanical damage caused by accident, fall or impact. . Malicious or intentional destruction. . Normal wear and tear or lack of maintenance.. Damage resulting from repairs carried out by unqualified persons. - Improper handling, insufficient maintenance and the use of unsuitable cleaning agents. - Chemical or mechanical action during transport, storage, connection, repair and use of the product. 2. Fulfillment of warranty claims Fulfillment of warranty claims includes, at our discretion, the free production, free delivery of spare parts or an equivalent product in exchange for the return of the defective part or product. If the type in question is no longer manufactured, we reserve the right, at our discretion, to provide a replacement product from our range that is as close as possible to the returned type. The replaced products or parts become our property. When sending the product, the buyer is responsible for the transport costs and the transport risk, to the extent that there is no guarantee case in accordance with the legal regulations on guarantees. In the latter cases, we reimburse the transport costs. Reimbursement of costs for disassembly and assembly, inspection, claims for loss of profit and compensation are excluded from the warranty, as are other claims for damages and losses of any kind caused by the product or its use. 3. Filing a warranty claim The warranty claim must be filed within the warranty period with Franz Joseph Schütte GmbH, Hullerweg 1, 49134 Wallenhorst upon presentation of the original purchase receipt. 4. Warranty period The warranty period is in principle the duration stated on the product label or packaging. If no specific warranty period is stated, the warranty period is in principle 2 years from the date of purchase, the date on the purchase receipt being decisive. Exception: The durability of any shiny chrome surfaces, such as bronzed or colored surfaces, here a warranty period of 1 year applies, again the date on the purchase receipt is decisive. The fulfillment of warranties does not extend or renew the warranty period for the product. Nor does the fulfillment of warranty claims prevent the warranty period, unless there is at the same time a warranty claim in accordance with the statutory provisions in addition to the other statutory requirements for an impediment. 5. German law applies to this warranty, with the exception of the United Nations Convention on Contracts for the International Sale of Goods (CISG). 6. If any provision of these agreements is or becomes invalid or unenforceable in whole or in part or if the parties mistakenly fail to reach an agreement on any point of this agreement, the validity of the other provisions of this agreement shall not be affected thereby. Instead of the invalid or unenforceable provision or the gap in the agreement, it shall be replaced by a valid or enforceable provision that comes closest to the meaning and purpose of the invalid or unenforceable provision. In the event of a gap, the provision that corresponds to the meaning and purpose of this contract, if it had been included in advance, is deemed to have been agreed. This applies even if the invalidity of a provision is based on a standardized measure of performance or time in this agreement. In such a case, a legally permissible measure of performance or time that comes as close as possible to the desired one will replace the agreed one.
